[one-users] Opennebula 3.8.1 on squeeze - VM is running, but can't boot, no bootable device

[Ákos Kovács]

Hi Guys!

I'm running opennebula 3.8.1 on squeeze with 2 squeeze host using kvm. I downloaded "squeeze - kvm" image from marketplace, but when I deploy it, it says: "No bootable disk" through VNC.

Same with ttylinux and ubuntu as well.

here is my vm template:



CPU="1"
DISK=[
IMAGE="Debian Squeeze - kvm" ]
GRAPHICS=[
LISTEN="0.0.0.0",
TYPE="vnc" ]
MEMORY="1024"
NAME="uj"
NIC=[
NETWORK="maxwell",
NETWORK_UNAME="oneadmin" ]
OS=[
ARCH="x86_64",
BOOT="hd" ]
RAW=[
TYPE="kvm" ]
TEMPLATE_ID="14"
I can't figure out what can be the problem, i tried RAW and QCOW2 as well but same...

Thanks


Kov?cs ?kos
Department of Telecommunication
Sz?chenyi Istv?n University
H-9026, Gy?r Egyetem t?r 1.

E-mail: jampy at sze.hu


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20121112/c2599f2a/attachment.htm>

[Daniel Molina]

Hi,

Post by Ákos Kovács
Hi Guys!
I'm running opennebula 3.8.1 on squeeze with 2 squeeze host using kvm. I
downloaded "squeeze - kvm" image from marketplace, but when I deploy it, it
says: "No bootable disk" through VNC.
Same with ttylinux and ubuntu as well.
CPU="1"
DISK=[
IMAGE="Debian Squeeze - kvm" ]
GRAPHICS=[
LISTEN="0.0.0.0",
TYPE="vnc" ]
MEMORY="1024"
NAME="uj"
NIC=[
NETWORK="maxwell",
NETWORK_UNAME="oneadmin" ]
OS=[
ARCH="x86_64",
BOOT="hd" ]
RAW=[
TYPE="kvm" ]
TEMPLATE_ID="14"
I can't figure out what can be the problem, i tried RAW and QCOW2 as well but same...

Could you send us the output of onevm show X and oneimage show X commands?

Cheers

Post by Ákos Kovács
Thanks
Kov?cs ?kos
Department of Telecommunication
Sz?chenyi Istv?n University
H-9026, Gy?r Egyetem t?r 1.
E-mail: jampy at sze.hu
_______________________________________________
Users mailing list
Users at lists.opennebula.org
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org

[Ákos Kovács]

Hi Guys!

I'm running opennebula 3.8.1 on squeeze with 2 squeeze host using kvm. I downloaded "squeeze - kvm" image from marketplace, but when I deploy it, it says: "No bootable disk" through VNC.

Same with ttylinux and ubuntu as well.

here is my vm template:



CPU="1"
DISK=[
IMAGE="Debian Squeeze - kvm" ]
GRAPHICS=[
LISTEN="0.0.0.0",
TYPE="vnc" ]
MEMORY="1024"
NAME="uj"
NIC=[
NETWORK="maxwell",
NETWORK_UNAME="oneadmin" ]
OS=[
ARCH="x86_64",
BOOT="hd" ]
RAW=[
TYPE="kvm" ]
TEMPLATE_ID="14"
I can't figure out what can be the problem, i tried RAW and QCOW2 as well but same...

Thanks


Kov?cs ?kos
Department of Telecommunication
Sz?chenyi Istv?n University
H-9026, Gy?r Egyetem t?r 1.

E-mail: jampy at sze.hu


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.opennebula.org/pipermail/users-opennebula.org/attachments/20121112/c2599f2a/attachment-0002.htm>

[Daniel Molina]

Hi,

Post by Ákos Kovács
Hi Guys!
I'm running opennebula 3.8.1 on squeeze with 2 squeeze host using kvm. I
downloaded "squeeze - kvm" image from marketplace, but when I deploy it, it
says: "No bootable disk" through VNC.
Same with ttylinux and ubuntu as well.
CPU="1"
DISK=[
IMAGE="Debian Squeeze - kvm" ]
GRAPHICS=[
LISTEN="0.0.0.0",
TYPE="vnc" ]
MEMORY="1024"
NAME="uj"
NIC=[
NETWORK="maxwell",
NETWORK_UNAME="oneadmin" ]
OS=[
ARCH="x86_64",
BOOT="hd" ]
RAW=[
TYPE="kvm" ]
TEMPLATE_ID="14"
I can't figure out what can be the problem, i tried RAW and QCOW2 as well but same...

Could you send us the output of onevm show X and oneimage show X commands?

Cheers

Post by Ákos Kovács
Thanks
Kov?cs ?kos
Department of Telecommunication
Sz?chenyi Istv?n University
H-9026, Gy?r Egyetem t?r 1.
E-mail: jampy at sze.hu
_______________________________________________
Users mailing list
Users at lists.opennebula.org
http://lists.opennebula.org/listinfo.cgi/users-opennebula.org